Saturday, October 29, 2005

 

I worked hard on that MSI video card.



I've got some pictures of the card, as you can see the screws are proprietary. Very irritating actually, a screw broke while unscrewing it.


Here is the screw and the card backside

Fortunately the card was done up with adhesive so tight I couldn't even wiggle the HSF on the card.

The project was a failure. It's ok the GPU will just run stock/too hot.

Since I couldn't make that happen I went ahead and upgraded his motherboard. I used an iceberq chipset cooler and some of the copper ram sinks from thermaltake. I also went ahead and swapped out his loud volcano fan with a 120x38 panaflo fan (adapter required).


Here is the finished machine

All in all it looks pretty good, and the temperatures are a lil lower at idle, but much lower peak temp at load.

More cool stuff later,

Ravi

Comments:
Ravi Brounstein
Thanks to visit our weblog:

Subject: [Noticiero Internacional del CamiĆ³n] 10/29/2005 08:11:59 PM
Date: Sat, 29 Oct 2005 16:16:01 -0700 (PDT)

I found another blog you might like http://electricaltech.blogspot.com/
Lemme know what you think, Ravi

Your's one it's very useful.

Morover, we wish to obtain your mail to thanksfully, in detail.
Santiago
www.transportruckbus@yahoo.com
 
Post a Comment



<< Home

This page is powered by Blogger. Isn't yours?